First measurable rain
The first hour is dry. From 07:00 to 08:00 the record gains 0.4 mm. Rain could have started anywhere within that second hour.
Inspect 08:00Hydrology field notebook
When does a shower peak, and how much water has fallen by then? This independent design prototype for the Rain Intel brand follows one synthetic storm from a dry start to a final depth of 27.7 mm.
Explore the rain traceRain Intel · rainintellabs.com
Hydrology students and instructors can use this notebook to practice reading an hourly gauge record. The question for this exercise is whether the end of the strongest rain is also the end of the event. Follow the bars past noon and keep a separate tally of the water that still falls.
Record A is loaded at noon. Select a bar, move the hour slider, or jump to a timestamp in the field notes. Arrow keys step the focused slider by one hour. The “After noon” tally counts only the water that falls after 12:00.
Selected interval
Peak hour
11:00–12:00 interval
Record A / Constructed hourly depths from 06:00 to 18:00. Times use an illustrative field clock.
Notebook calculation
The six hourly depths ending at 07:00 through 12:00 are 0.0, 0.4, 1.2, 3.2, 5.8 and 7.2 mm. At 11:00 the first five add to 10.6 mm. The next hour contributes 7.2 mm over one hour, giving a mean intensity of 7.2 mm/h and a noon total of 17.8 mm.
Move one step to 13:00. The hourly rate drops to 4.9 mm/h while the total rises to 22.7 mm. That pairing is worth writing down. The shower has weakened and is still adding water.
Event annotations
Use these entries to mark the start, peak and close of Record A. Each timestamp opens its interval on the reader. For a lab notebook, carry over the interval boundaries, the rate and the running depth so another reader can reconstruct the observation.
The first hour is dry. From 07:00 to 08:00 the record gains 0.4 mm. Rain could have started anywhere within that second hour.
Inspect 08:00The bar ending at noon stands tallest. A caption for a classroom figure could read “Peak hourly mean, 11:00–12:00, 7.2 mm/h. Event depth at that point, 17.8 mm.”
Inspect 12:00The total reaches 27.7 mm by 17:00. The last hour contributes 0.0 mm and closes at the same total. Check the “After noon” tally here to see how much water arrived during the easing phase.
Inspect 18:00Reading guide
How fast? How much? How to check? Each answer uses the same twelve constructed depths.
Divide interval depth by interval length in hours. In this exercise every interval lasts exactly one hour, so the rate and depth share a number and have different units. The hourly mean cannot tell you whether the rain was steady or arrived in a five-minute burst.
The browser reads twelve constructed depths stored as whole tenths of a millimetre. It adds them in time order and converts each running sum to millimetres for display. Every selection looks up the same interval for the bar, the running total and the highlighted table row.
At 15:00 the running depth was 26.9 mm. At 16:00 it was 27.5 mm. Subtract the earlier total to isolate the rain that fell during that one hour.
27.5 − 26.9 = 0.6 mm
Over one hour, this depth gives a mean of 0.6 mm/h. Check the 16:00 reading to see that rate alongside the accumulated depth.
| Hour ending | Intensity (mm/h) | Accumulated (mm) |
|---|
Scope of the exercise. Record A has an illustrative clock and no station, location or observation date. Its values were chosen for this teaching exercise. A real field report would need the gauge location, sampling interval and any gaps in coverage before these calculations could support a claim about a particular storm.
Record A · Closing entry
At noon the strongest hour had passed and 17.8 mm had fallen. Six later intervals added another 9.9 mm, more than the 7.2 mm of the peak hour. Before you close the notebook, check one of those hours yourself. Subtract the 15:00 total from the 16:00 total, then confirm your answer on the reader.
Synthetic record. No station, location or date.
Rain Intel
Ibrahim Alabi, Founder